Kverneland CLC pro Cut

CLC pro Cut for long residues

The CLC pro in its Cut variant is offering 4 working widths with rigid models 3,0 - 3,50m and 4,00m - 4,50m folding.
The frame design is the same as the “Classic” model with the rear equipment based on roller arms holding a bar of levelling tines in front of the roller. Other equipment from the CLC pro is also available like the combidisc harrow or the double disc gang for intensive incorporation.

Max power for the 3,00m is 240hp.
The full roller program is available for this Cut version.
The front cutting disc can be hydraulically adjusted from the cab at any time. This means that the pressure on the discs is also defined by the cylinder position.
The working depth is often around 5 cm to be able to cut the material and the roots if necessary. Each disc is independently protected by 4 rubber shock absorbers.
The bearings are maintenance free.

Zone 1 - cutting
Equipped with one row of front cutting discs, the CLC pro Cut is the ideal machine for working with long residue conditions like sunflower, maize, etc…

Zone 2 - cultivating
The front cutting discs are followed by 2 rows of tines with wide tine spacing (approx. 400mm) for managing the residues. The wider share, Quantum 345mm, is used. The tines can have Knock-On deflectors for nice stubble incorporation.

Zone 3 - levelling
The rear equipment on the CLC pro Cut reduces the required lifting capacity. The machine can then be equipped with the levelling tines and the short roller arms. The machine is then compact enough to be used with a lighter tractor. Other equipment like Combi-disc or double discs can also be used.

Zone 4 consolidation
Very active rollers provide a nice recompaction and close contact soil / residues.

Models CLC pro Cut 300 CLC pro Cut 350 CLC pro Cut 400F CLC pro Cut 450F
N° of tines 7 9 11 13
N° of cutting discs 10 12 13 15
Working/transport width (m) 3.00/3.00 3.50/3.50 4.00/2.85 4.50/2.85
Min/Max. HP 100/240 135/270 185/300 190/325
Weight: Shearbolt, levelling tines, Actiring  1807 kg 2055 kg 3017 kg 3302 kg
Detaljer

CLC pro Cut - Strong Frame

  • The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
  • The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
  • The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
  • The material used can bear significant loads while staying reliable and light.
  • The weight carried by the tractor is thus reduced and helps saving fuel.
  • The CLC pro Cut is 50cm shorter than the CLC pro when equipped with the bended arms (from the Classic version), shifting the centre of gravity closer to the tractor.

CLC pro Cut - Tines and Shares

  • The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
  • The heat treatment is of the same standards as the beams on the Kverneland ploughs.
  • The tine leg can withstand sideway movements of up to 14cm. This means lower stress to the tine holder and frame structure.
  • The CLC tines are suitable to work at 30 cm depth to fight plough pans and to encourage natural drainage, even in stony soils.
  • The removal of soil compaction allows intensive rooting in the lower soil layers. The plants therefore gain access to nutrients and water reserves at these deeper soil levels.
  • For operation in rather abrasive soil, Kverneland offers the option of carbide faced shares and wing shares.
  • The carbide faced parts last 5 to 12 times longer than the standard ones
  • The wing share is the right choice for shallow stubble cultivation. 

For further details on the knock-on system.

Bladfjær/Vibromat

  • For lettere forhold kan Kverneland CLC leveres med bruddbolt sikring.
  • Den modellen har samme styrke som bladfjær modellen, og det må en kraft på 2 tonn for at bruddbolten skal løse ut.
  • Kverneland CLC tinden er utstyrt med «AutoReset» bladfjær utløsersystem som er perfekt for middels og tøffe forhold.
  • Dette er det det velkjente bladfjær systemet til Kverneland som er brukt på ploger i en årrekke.
  • Om ønskelig kan utløsertrykket justeres.
  • Alle bevegelige deler på CLC tindene er utviklet for lang levetid grunnet den kjente Kverneland kvaliteten.
  • Derfor er CLC tindene vedlikeholdsfrie.

CLC pro Cut - Rear Accessories

The CLC pro Cut can be equipped with a wide range of rear implements.

Levelling tines

  • Good levelling capacity
  • Good following of the ground contour
  • Angle adjustable by turnbuckle 

Combi disc harrow:

  • Combination of a single disc gang with all roller types
  • Intensive incorporation of the residues
  • The angel of the disc gang is adjustable
  • The depth of the disc harrowis hydraulically adjustable
  • Mounted on parallelogram

Cage roller ø 550mm - 90 kg/m

  • 10 bars for a good loading capacity and operation in wet conditions
  • Effective crumbling action

Double cage roller ø 400mm (tube/flat) - 160 kg/m

  • Good crumbling
  • Precised depth control

Actipack ø 560mm - 220 kg/m

  • The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils, also in wet, stony and sticky conditions thanks to the independent skids and knives
  • The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breadown and fine seedbed preparation

Actiring ø 540mm - 160 kg/m

  • The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system
  • The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment
  • Actiring is not recommended in stony conditions

Actiflex roller ø580mm - 160 kg/m

  • The Actiflex roller has been made to create an intensive mixing under all conditions, even stony ones
  • The rings are made with spring steel to have a high resistance against stress at high speed
  • Actiflex rings are separated by skids to prevent any accumulation inside the roller
  • This roller is the ideal tool to create a nice seedbed and enhance the weeds regrowth after harvesting