Kverneland 6300 S VARIOMAT
Lave driftskostnader og ideell vektoverføring for høy plogytelse.
Allsidig plog for høy ytelse Ny generasjon halvmontert vendbar plog 5 - 8 furer
Beskrivelse
Kverneland 6300 S Variomat® er en ny generasjon semimonterte vendeploger som er utviklet for store arealer. Den vant prisen for Årets maskin i kategorien jordbearbeiding i 2020. Den er utstyrt med Auto-reset og Variomat®, og tilpasser seg ulike jordtyper og -forhold: Utmerket manøvrerbarhet under arbeid og transport. Det største bakmonterte hjulet på markedet er montert bak for best mulig vektoverføring fra hjulet til traktorens bakhjul. Plogen er derfor stabil og lett å trekke, selv under våte forhold. Enkel vending på vendeteigen med liten reverseringsradius. Plogens lave tyngdepunkt sørger for sikker transport
Høydepunkter
- Høye ben med aerodynamisk profil for best mulig jordflyt
- Rask sentral justering av skrapere for perfekt pløying
- Stort bakhjul for optimalisert vektoverføring: lett å trekke, pløying av høy kvalitet
- Stort hjul for best mulig stabilitet, spesielt under våte forhold, for å begrense nedsynking og jordpakking
- Robust konstruksjon: Kat III/IV, 200 x 200 mm hovedramme (ingen sveising)
- Sikker reversering og minimalt med vendeteiger takket være den robuste vendemekanismen for optimal vinkel
- Hydraulisk eller manuell justering av frontfuren
- Rekonsolidering av jorda: Kverneland Packer tilgjengelig
Egenskaper
Aero-profile legs
- Special design for best soil flow.
- 80 cm leg height to prevent potential blockage in heavy residues, manure, cover crops or when ploughing deeper.
- Robust legs: pre-shaped components limiting weldings.
- Low pulling requirement and hence fuel consumption thanks to low weight hollow legs.
Auto-reset system
- Unrivalled Kverneland mechanical leaf spring system for Non-stop ploughing.
- No Maintenance.
- Legs, plough and tractor lives are protected and lengthened.
- Quality ploughing: legs release independently one from another and come back to the correct position.
- Easy adjustment of releasing forces: unscrew 2 bolts to add or remove springs.
Leaf springs |
Release Pressure kN |
Standard Pack 6 leaf springs |
11,7 |
Standard Pack 6+1 leaf springs |
13,0 |
HD 7 leaf springs |
12,7 |
HD 7+1 leaf springs |
14,2 |
Extra HD 8 leaf springs |
15,3 |
Extra HD 8+1 leaf springs |
16,9 |
Smart skimmers adjustment
- Unique: central adjustment of skimmers working depth.
- Quick operations: right and left skimmers adjust simultaneously.
- High ploughing performance: the correct adjustment of skimmers contribute to a quality ploughing.
- Disc coulters also available: plain or notched (18”/45cm or 20”/50cm)
Importance of heat treatment
- The frame is an essential part of the plough construction. For Kverneland quality standards, a non heat treated part is a weak part!
- Kverneland frames are heat treated by induction twice. The temperature transfer to the steel is closely monitored. The frame gains 3 times as much strength. This unique Kverneland induction processes provides robustness and flexibility while ensuring an outstanding durability.
Stronger but not heavier
- For the equivalent Kverneland robustness, competitors would use more steel in thickness or in dimensions, therefore producing a heavier frame.
- Heavier frame impacts negatively pulling forces, wearing of parts, lifting capacities, tractor life time, and fuel consumption.
Long lasting
- Weldings are also a critical weakness for a plough frame. Kverneland frames are supplied as one sole part!
Stepless Vari-width® system for infinite adjustments of working width. Kverneland’s world patented system is available either with hydraulic or mechanical furrow adjustments.
Benefits:
- Easy variation of ploughing capacity
- Perfect match at all time between tractor capacity, implement and soil conditions
- Time saving: up to 30% more capacity
- Cost saving: up to 18% reduction in fuel consumption in relation with increased ploughing capacity
- Better work: plough up to the hedges, fences, trees and ditches
- Minimum wear: unique non-wearing linkage joint between the beams and the mainframe section
- Perfect line of pull at all time. Kverneland’s Vari-width offers the correct parallel linkage along the whole plough. Therefore, lower draft requirement, minimum wear and tear.
Excellent Ploughing Quality
They are renowned all over the world for their:
- excellent ploughing quality
- outstanding wear resistance
- low draft requirements
Bodies of a unique steel.
Kverneland Technology: 12 hours carburising heat treatment process for:
- optimum wear resistance (sharp as a diamond)
- the necessary flexibility to absorb impacts
Body No. 8 – “Universal body”
for light to heavy soils
good trash burial
easy pulling
Depth: 15 to 30 cm (6 to 12”)
Width: 30 to 55 cm (12 to 22”)
Body No. 9 – “Deep Universal body”
for heavier soils and deeper ploughing
well turned and packed furrows
easy pulling
Depth: 15 to 35 cm (6 to 14”)
Width: 30 to 55 cm (12 to 22”)
Body No. 28 – “Wide tyre body”
suits all soils; even heavier soils than body 8
very wide empty furrow for tractor wheels up to 710 mm
good turning and well packed
easy pulling
suitable for Depth: 12 to 30 cm ( 5 to 12”)
Width: 30 to 55 cm (12 to 22”)
Body No. 30 – “Finger body”
for sticky-stony soil and abrasive soils
good work in heavier soils
best crumbling effect
wide furrow bottom,
Depth: 20 to 35 cm (8 to 14”)
Width: 30 to 55 cm (12 to 22”)
Body No. 34 – Plastic mouldboard
Long and slim shape (similar to body 28)
For soils with high humus content without stones
Advised for tactors with large tyres
Easy pulling
Working depth: 12-35cm
Working width: 30-55cm
Landside / mouldboard: 40 degree
Body No. 38
universal body – easy to pull
for any soil conditions
recommended for tractors with large tyres
from deep to shallow ploughing
perfect turning of the furrow slice
working depth: 12-35 cm
working width: 30-55 cm
landside / mouldboard: 40°
Kverneland Heat Treatment Technology:
- more than 140 years of experience
- steels that withstand the toughest of conditions
- best robustness/weight ratio on the market
- for equivalent robustness, competitors would add more steel and therefore more weight, quicker wear, dissappointing ploughing results
Kverneland Steels:
- Benefits from less weight:
easier to pull/lower fuel consumption/lower lift requirement/reduced wear and stress for the tractor/more economical … - Benefits from more resistance:
minimum breakage/less maintenance/lower rotation for wearing parts/time saving/highest 2nd hand plough value/longer life for the plough/more economical…
Problems always happen when the plough is being used, when the work must be done!
A Kverneland plough is a peace mind!
More info: Kverneland Technology
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyre| Model | 6300 S Variomat | 6300 S Variomat | ||
|---|---|---|---|---|
| Interbody clearance cm | 100 | 115 | ||
| Leg protections | Auto-reset | Auto-reset | ||
| Working width cm | 35-55 | 35-55 | ||
| Underbeam clearance cm | 80 | 80 | ||
| No. of furrows | 6-8 | 5-7 | ||
| Weight (kg) | 4 | – | – | |
| 5 | – | 3060 | ||
| 6 | 3340 | 3430 | ||
| 7 | 3720 | 3820 | ||
| 8 | 4100 | – | ||
| Horse power requirement (hp) | 4 | – | – | |
| 5 | – | 125 | ||
| 6 | 150 | 150 | ||
| 7 | 175 | 175 | ||
| 8 | 200 | – | ||
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyreModel |
Interbody Clearance cm |
Underbeam clearance cm |
Working width cm |
No of furrows |
6300 S Variomat |
100 |
80 |
35 - 55 |
6 - 8 |
6300 S Variomat |
115 |
80 |
35 - 55 |
5 - 7 |