NG-S 101 F35
Kverneland rotorharver med styrke og pålitelighet - rotorharver du kan stole på!
Kverneland sammenleggbar rotorharv NG-S 101 F35 - For traktorer opp til 350 hk
Høydepunkter
- Høy ytelse
- Robust, selvbærende traudesign
- Robust tårn for enkel tilkobling til alle traktorer
- Kan kombineres med såmaskinkombinasjoner
- Utstyrt med Quick-Fit tinder for å redusere nedetid
Beskrivelse
Kvernelands sammenleggbare rotorharv NG-S 101 F35 med 4,50 til 6,00 m arbeidsbredde tilbyr høy ytelse, maksimal holdbarhet og smale transportmuligheter, selv i kombinasjon med såmaskiner fra Kverneland.
En kraftig spindel og et robust transmisjonssystem sikrer effektiv og sikker drift. Det avanserte parallellogram hydrauliske dybdekontrollsystemet garanterer et perfekt såbed.
Høydepunkter
- Høy ytelse med førsteklasses teknologi og lav vekt
- Robust, selvbærende traukonstruksjon som gir den nødvendige styrken som trengs
- To store koniske lagre med stor avstand gir stivhet og lang levetid.
- Robust og pålitelig frontmontert maskin for enkel tilkobling til alle traktorer og montering av tunge såmaskinkombinasjoner.
- NG-S 101 F35 er utstyrt med Quick-Fit tinder for å redusere nedetiden
Egenskaper
Egenskaper
The proven trough design is taken from the rigid NG-S 101.
- The upper half of the trough is made from 10 mm steel plate. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions, the trough base is also made from 10mm steel plate.
- The welded conical bearing housings give highest strength to the overall trough.
- The heavy duty tine carrier shafts are 60mm diameter with the conical bearings dimensioned large enough to cope with tough and stony conditions.
The proven trough design is taken from the rigid NG-S 101.
- The upper half of the trough is made from 10 mm steel plate. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions, the trough base is also made from 10mm steel plate.
- The welded conical bearing housings give highest strength to the overall trough.
- The heavy duty tine carrier shafts are 60mm diameter with the conical bearings dimensioned large enough to cope with tough and stony conditions.
The proven trough design is taken from the rigid NG-S 101.
- The upper half of the trough is made from 10 mm steel plate. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions, the trough base is also made from 10mm steel plate.
- The welded conical bearing housings give highest strength to the overall trough.
- The heavy duty tine carrier shafts are 60mm diameter with the conical bearings dimensioned large enough to cope with tough and stony conditions.
The proven trough design is taken from the rigid NG-S 101.
- The upper half of the trough is made from 10 mm steel plate. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions, the trough base is also made from 10mm steel plate.
- The welded conical bearing housings give highest strength to the overall trough.
- The heavy duty tine carrier shafts are 60mm diameter with the conical bearings dimensioned large enough to cope with tough and stony conditions.
The proven trough design is taken from the rigid NG-S 101.
- The upper half of the trough is made from 10 mm steel plate. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions, the trough base is also made from 10mm steel plate.
- The welded conical bearing housings give highest strength to the overall trough.
- The heavy duty tine carrier shafts are 60mm diameter with the conical bearings dimensioned large enough to cope with tough and stony conditions.
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyre
You can select up to 5 models. Additional models are disabled. Please adjust your selection if you'd like to choose different models."
You can select up to 2 models. Additional models are disabled. Please adjust your selection if you'd like to choose different models.
At least 1 model must be selected. Please adjust your selection if you'd like to choose different models.
| Modell | F35 | F35 | F35 | |
|---|---|---|---|---|
| Maskintype | foldbar | foldbar | foldbar | |
| Arbeidsbredde (m) | 4.5 | 5.0 | 6.0 | |
| Transportbredde (m) | 2.5 | 2.5 | 2.5 | |
| Dimensjon tråg (mm) | 150 x 400 | 150 x 400 | 150 x 400 | |
| Kraftuttakets inngangshastighet (o/min) | 1,000 | 1,000 | 1,000 | |
| Beskyttelse mot overbelastning på kraftuttaksakselen (Nm) | 2,500 | 2,500 | 2,500 | |
| Antall rotorer | 18 | 20 | 24 | |
| Standard rotorhastighet 1000 o/min (rpm) | 246, 326 og 387 (3-trinns) | 246, 326 og 387 (3-trinns) | 246, 326 og 387 (3-trinns) | |
| Valgfri rotorhastighet 1000 o/min (o/min) | 326 og 387 (2-trinns) | 326 og 387 (2-trinns) | 326 og 387 (2-trinns) | |
| Konisk lageravstand (mm) | 110.5 | 110.5 | 110.5 | |
| Rotoravstand (mm) | 147 | 147 | 147 | |
| Antall tinder | 36 | 40 | 48 | |
| Tindimensjon (mm) | 18 x 330 | 18 x 330 | 18 x 330 | |
| Hurtigmonterte tinder | Standard | Standard | Standard | |
| Aktive tinder | Tilvalg | Tilvalg | Tilvalg | |
| 3-punkts kobling: Topp | CAT III | CAT III | CAT III | |
| 3-punkts sammenkobling: Lav | CAT III | CAT III | CAT III | |
| Dybdejustering | hydraulisk | hydraulisk | hydraulisk | |
| Nivelleringsbjelke bak | Tilvalg | Tilvalg | Tilvalg | |
| Sporutjevning | Tilvalg | Tilvalg | Tilvalg | |
| Tilbud av valser | Cage-valse (ø 550 mm), Tooth Packer-valse (ø 575 mm), Actiline-valse (ø 550 mm), Cracker Packer-valse (ø 550 mm), Actipack-valse (ø 560 mm) | Cage-valse (ø 550 mm), Tooth Packer-valse (ø 575 mm), Actiline-valse (ø 550 mm), Cracker Packer-valse (ø 550 mm), Actipack-valse (ø 560 mm) | Cage-valse (ø 550 mm), tannpakkervalse (ø 575 mm), Actiline-valse (ø 550 mm), Cracker Packer-valse (ø 550 mm), Actipack-valse (ø 560 mm) | |
| Klar til å bære eller integrere såmaskiner | Tilvalg | Tilvalg | Tilleggsutstyr | |
| Belysningssett | Tilvalg | Tilvalg | Tilvalg | |
| Totalvekt (kg)* | 3,200 | 3,500 | 3,900 | |
| Minimum effektbehov (kW/HP) | 103/140 | 103/140 | 103/140 | |
| Maksimalt effektbehov (kW/HK) | 257/350 (ekstrautstyr med 400 HK gir) | 257/350 (ekstrautstyr med 400 HK gir) | 257/350 (ekstrautstyr med 400 HK gir) |
Unable to load the table
* Ca. vekt med nivelleringsbjelke, tannpakkervalse ⌀ 575 mm og kraftuttak ca.
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyreModel |
Working/Transport width (m) |
No. of rotors |
Weight with packer roller (kg) |
NG-S 101 F35 4.5m |
4.5/2.9 |
18 |
3200 |
NG-S 101 F35 5.0m |
5.0/2.9 |
20 |
3500 |
NG-S 101 F35 6.0m |
6.0/2.9 |
24 |
3900 |
* Ca. vekt med nivelleringsbjelke, tannpakkervalse ⌀ 575 mm og kraftuttak ca.