f-drill compact / maxi
Med fleksibilitet klar for fremtiden
Den frontmonterte beholderen på Kverneland f-drill sørger for jevn vektfordeling over hele maskinarrangementet, noe som gir maksimal balanse. Den frontmonterte plasseringen av beholderen forbedrer både sikkerheten, manøvrerbarheten og gir ubegrenset oversikt over maskinoppsettet.
Høydepunkter
- Utmost flexibility – for all kind of farming systems
- Safe manoeuvrability due to even weight distribution
- Reduced soil compaction
- Long lifetime of the corrosion resistant plastic hopper
- Precise and intelligent seed application
- Reduced set-up time due to large hopper capacity
Beskrivelse
f-drill er konstruert for å gi bønder og entreprenører maksimal fleksibilitet, ettersom den kan tilpasses alle typer oppdrettssystemer. F-drill-modellene kan kombineres med ulike redskaper som såmaskin eller kultivator, og de kan brukes i ulike arbeidsbredder.
Takket være den oversiktlige designen og det høye nivået av innebygd intelligent teknologi er f-drill svært brukervennlig, fra oppsett og fylling til balansert transport med god oversikt foran og bak traktoren.
Det er mulig å så og gjødsle, så og kultivere eller gjødsle og kultivere som strip-tillage i én overfart, samt å kombinere såing og såing av følgevekster med de tre modellene i to størrelser.
f-drill compact/f-drill maxi: Standardmodellen er utstyrt med en ELDOS-doseringsenhet for én type såkorn eller gjødsel.
f-drill compact duo/f-drill maxi duo: duomodellen er utstyrt med to ELDOS-enheter for høyere doseringsmengder av én type frø eller gjødsel.
f-drill compact plus/maxi plus: Plus-modellen er utstyrt med to ELDOS-enheter, og beholderen er delt i to seksjoner for kombinert utlegging av to typer materiale. Forholdet mellom beholderne er 60:40.
Bærekraftig jordbrukspraksis for sunn jord og høy avling
Jordsmonnet - din mest verdifulle ressurs
En sunn jordstruktur er grunnlaget for et bærekraftig landbruk. Et godt forberedt og jevnt såbed sikrer jevn oppkomst av avlingen og optimal planteutvikling. For å beskytte jordkvaliteten bør bøndene fokusere på redusert antall overkjøringer, riktig vektbalanse og riktig timing for å forhindre jordpakking og kjøreskader.
Støtte det biologiske mangfoldet med flerkulturer
Praksiser som flerkulturer og samdyrking spiller en viktig rolle når det gjelder å fremme biologisk mangfold og beskytte jorda mot erosjon. Ved å kombinere ulike avlinger på samme åker kan bøndene undertrykke ugress, stabilisere jorda og forbedre økosystemets generelle helse.
Presisjonsgjødsling for bærekraftig vekst
Presis gjødsling til rett tid er avgjørende for avlingenes helse og langsiktig bærekraft i landbruket. Effektiv bruk av næringsstoffer bidrar til sunn rotfeste, reduserer utvasking og øker humusinnholdet og CO₂-lagringskapasiteten, noe som styrker både jordfruktbarheten og klimarobustheten.
Innovativt utstyr for effektivitet og lang levetid
Moderne landbruksutstyr som Kvernelands f-drill bidrar til bærekraft ved at flere oppgaver kan kombineres i én arbeidsgang, noe som sparer både tid og drivstoff, samtidig som jorda skånes. Den lette beholderkonstruksjonen, som er laget av slitesterk, korrosjonsbestandig plast, sikrer høy kapasitet, lang levetid og optimal vektfordeling for minimal jordpåvirkning.
Egenskaper
Egenskaper
Precise seed metering, automatic and safe
- ELDOS is the electric driven metering device for Kverneland pneumatic seed drills.
- ELDOS is steered by Kverneland e-com software, which is fully ISOBUS compatible.
- By the automatic section control, GEOCONTROL, the metering device stopps/starts automatically. Double and/or missed seeding on headlands or odd-shaped fields is avoided. Special sensors ensure complete functionality from the tractor cab.
- Calibration is automatic, and a range of interchangeable seed metering rotors can be swapped - even when the hopper is full - without the need for tools. Sensors monitor the metering rotors, and give a warning if the wrong metering rotors are accidentally installed.
- The f-drill is available with one or two ELDOS metering units. Two ELDOS are possible if larger quantities have to be applied as with the duo models.
- If the hopper is divided as plus version, there are also two ELDOS available to have the possibility to apply either two different seeds or seeds and fertiliser in one pass.
- The entire system is based on the Venturi principle. No additional effort is required to keep the system tight. The Venturi system guarantees the accuracy of the desired dosage and also the adherence to higher application rates.
For all kind of combinations and applications in various working widths
- A wide range of fine to larger seeds and fertiliser can be applied.
- It allows seeding and fertilising in one pass
- It allows the combined application of seeds and companion crops
- In spring the Kverneland f-drill can be used as a fertiliser hopper with the Optima F or with the Kultistrip for strip tillage. When joined with a power harrow drill combination such as the Kverneland e-drill, the f-drill can be used as an additional seed hopper for sowing companion or spring crops.
- In summer and autumn, the hopper can be combined with the power harrow range and coulter bars to have a compact combination from 3.0 up to 6.0m working width.
Modern design for low maintenance and long lifetime
- The f-drill made of plastic has a modern design which ensures low maintenance and long lifetime also when working with corrosive material such as fertiliser.
- The f-drill front hoppers are available in two sizes and three versions.
- The f-drill compact has a capacity of 1600 litres and the f-drill maxi up to 2200 litres.
- The standard version is equipped with one ELDOS metering unit. Either seeds or fertiliser can be filled into the hopper.
- Higher application rates can be achieved by the duo version, as two ELDOS units distribute two times up to 400kg/ha of one type of fertiliser or seeds.
- The hopper of the plus model is divided into two sections. This allows either two types of seeds or one type of seeds and fertiliser to be applied in one pass. The ratio of the hopper split is 60:40.
Easy filling and lifting
- The large hopper capacity of up to 2,200 litres reduces the set-up time.
- The hopper covers open sidewise and lock automatically supported by gas cylinder.
- The hopper made from plastic can easily be filled using e.g. big bags, a front loader or a telescopic handler.
- The parking wheels are available for quick and easy storage. The f-drill can easily be hitched. There is no PTO shaft needed.
- Pipes installed on the side of the cab convey the seed or fertiliser to the coulters by an air stream.
Increased safety and manoeuvrability
- The dissolved structure of the Kverneland f-drill ensures an even weight distribution across the machine arrangement, giving the tractor the best balance at maximum capacity.
- This improves both safety and manoeuvrability whilst at the same time giving the driver an unrestricted view over the entire machine set-up.
- The wheel packer with lifting function relieves the load on the front axle while maintaining good steering ability.
- The packer is self-steering and pull-attached which reduce power requirement and fuel consumption. In addition it also avoids the bulldozing effect.
- Especially in wet periods, the dissolved design with its better weight distribution reduces the impact on the soil structure
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyre| Model | f-drill compact | f-drill maxi | f-drill compact duo | f-drill maxi duo | |
|---|---|---|---|---|---|
| Machine type | modular mounted | modular mounted | modular mounted | modular mounted | |
| Hopper capacity (l) | 1,600 | 2,200 | 1,600 | 2,200 | |
| Machine width (m) | 2.75 | 2.75 | 2.75 | 2.75 | |
| Weight base machine (kg) | 658 | 678 | 732 | 752 | |
| Weight optional front packer (kg) | 361 | 361 | 361 | 361 | |
| Ballasting weights 100 - 600kg (steps 2 x 50kg) | Option | Option | Option | Option | |
| Min. power requirement (HP/Kw) | 106/80 | 173/130 | 106/80 | 173/130 | |
| Hydraulic fan drive closed centre | Standard | Standard | Standard | Standard | |
| Hydraulic fan drive open centre wih adjustment valve | Option | Option | Option | Option | |
| Hydraulic fan drive power beyond load sensing | Option | Option | Option | Option | |
| Oil charge hydr. fan (l/min) | 30 | 30 | 40 | 40 | |
| ELDOS electric driven metering device (no.) | 1 | 1 | 2 | 2 | |
| Metering units in relation to the no. of distribution heads | 1 | 1 | 2 | 2 | |
| e-com electronic (IsoMatch Tellus GO+ / Tellus Pro) | Standard | Standard | Standard | Standard | |
| Working switch for metering unit (start/stop) on top link for older tractors | Option | Option | Option | Option | |
| Metering device control | Standard | Standard | Standard | Standard | |
| Seed rate adjustment | Standard | Standard | Standard | Standard | |
| Seed quantity (min-max.) - kg/ha* | 1-400 | 1-400 | 2-600 | 2-600 | |
| Ø 100mm distribution system | Standard | Standard | Standard | Standard | |
| Ø 135mm distribution system | Option | Option | Option | Option | |
| Radar speed signal | Standard | Standard | Standard | Standard | |
| Calibration set | Standard | Standard | Standard | Standard | |
| Quick empyting chute | Standard | Standard | Standard | Standard | |
| Low level sensor | Standard (1) | Standard (1) | Standard (2) | Standard (2) | |
| Platform | Standard | Standard | Standard | Standard | |
| Lighting equipment | Standard | Standard | Standard | Standard | |
| Working lights | Option | Option | Option | Option | |
| Working width seed coulter bar grain (m) | rigid: 3.0m; 3.5m; 4.0m /fold: 4.0m; 4.5m | rigid: 3.0m; 3.5m; 4.0m /fold: 4.0m; 4.5m | fold: 5.0m; 6.0m | fold: 5.0m; 6.0m | |
| No. of precision planter rows | 4 - 8 | 4 - 8 | 9 - 16 | 9 - 16 | |
| Hydr. spool valves 1 sa + pressless return for fan drive | Standard | Standard | Standard | Standard | |
| Hydr. spool valves 1 sa + pressless return for fan drive and optional comfort front packer | Option | Option | Option | Option | |
| Additional hydr. spool valves 1 da for optional basic front packer lifting | Option | Option | Option | Option |
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyreModel |
f-drill compact |
f-drill maxi |
f-drill compact duo |
f-drill maxi duo |
Machine type |
modular mounted |
modular mounted |
modular mounted |
modular mounted |
Hopper capacity (l) |
1,600 |
2,200 |
1,600 |
2,200 |
Machine width (m) |
2.75 |
2.75 |
2.75 |
2.75 |
Weight base machine (kg) |
658 |
678 |
732 |
752 |
Weight optional front packer (kg) |
361 |
361 |
361 |
361 |
Ballasting weights 100 - 600 kg (steps 2 x 50kg) |
Option |
Option |
Option |
Option |
Min. power requirement (HP/Kw) |
106/80 |
173/130 |
106/80 |
173/130 |