Kverneland Roc 1073 S
Sammenslåinger med side- eller midtlevering
Universalfusjonere med variabel arbeidsbredde fra 7 til 7,3 m
Høydepunkter
- Belte med sagformede, glassfiberforsterkede tverrstenger
- Brede, opphengte tandemhjul under beltet gir beskyttelse og god bakke følging
- Den unike beltedesignen resulterer i jevne og myke skår
- Avlingsplassering og skårvolum kan være svært allsidig
- Takket være det store oljevolumet er det ikke behov for en kjølevifte
Beskrivelse
Kverneland Roc 1073 S er en maskin som er konstruert med to pickup-enheter som kan forskyves hydraulisk, slik at føreren kan bruke den til side- eller midtlevering. Sideleveringen har en minimum arbeidsbredde på 7 m, mens midtskåret kan utvides til maksimalt 7,30 m. De bemerkelsesverdige egenskapene inkluderer utmerket fjæring for løfting og transport av avlinger uten jordforurensning. Pickupen og valsen med seks stenger fungerer godt for ulike ensilasjesnitt, og det forsterkede beltet har sagbladformede tverrstenger for alle avlingsforhold. I tillegg kan den helopphengte valsen løftes hydraulisk fra førerhuset i alle posisjoner for tørre avlinger med høyt volum. Kverneland Roc 1073 S kan foldes sammen til 2,5 m bredde for enkel transport på vei, og har veifjæring for komfortabel og rask transport.
Høydepunkter
- Bakmontert 2 beltesammenslåing med variabel arbeidsbredde fra 5,95 m til 7,30 m.
- Designet for universell bruk som side- eller midtskårlegging.
- Unikt pickup-system med 6 stenger for å sikre ren sammenslåing.
- En 250 mm rulle nær tindene garanterer jevn materialflyt for best mulig skårlegging, selv i korte avlinger.
- Unik transportbærer med sentralt opphengt vendepunkt for pickupenhetene og tandemhjul.
- Elektrisk høydejusteringssystem
- God styring og manøvrerbarhet
- Sammenleggbar bredde på 2,5 m for veitransport.
- Enkelt vedlikehold, kvalitet og utskifting av komponenter.
- En intuitiv kontrollenhet betjener alle viktige funksjoner.
Egenskaper
Egenskaper
- Large roller to operate in all crops
- The roller is in all positions hydraulic suspended
- Specially designed belt and pickup
- If the crops are dry, the roller can be lifted from the cabin to protect the leaves
- A single belt system with two pick-ups
- Fiberglass-reinforced saw blade-shaped crossbars provide optimal transportation for dry and wet crops
- An actively-driven belt, equipped with a sprocket and gear belt, ensures continuous operation even in heavy crop conditions
- Most maintenance and repairs can be done without removing the belt, and all parts can be disassembled with a single wrench
- The speed of the belt and pick-up can be precisely adjusted
- The tension of the belt is evenly distributed between the left and right sides since it is adjusted centrally
- Controlled pick-up with two cams and six tine bars
- For heavy crops such as silage and maize straw, it is recommended to use wide stripes
- Heavy-duty plastic strippers maintain shape when hitting rocks and their design prevents crop loss
- Even the shortest crop can be transported on the belt with the hydraulic adjustable roller suspended in all independent positions
- Replacing tines with only two bolts to remove (one per tine and one per plastic stripper) using only one hand
- It is possible to repair bearings, cam track, and tine bars without the need to disassemble the pick-up
- Electric height adjustment
- The machine is designed for both centre and side delivery
- The side delivery has a working width of 7m, expanding to a maximum of 7.3m
- With expanded pickups, the rake can create a central swath or side belts turning left or right
- As the crop is transported on the belt, there is no roping, so the swath can be picked up and transported several times
- Our mergers are designed and built to be maintenance-friendly
- All components can be easily disassembled
- Wear parts are in small size and replaceable with limited efforts
- To ensure a high speed and a clean crop in all conditions, four suspensions are used
- The pickup's standard tandem wheels protect the ground from damage
- The tandem wheel comes equipped with a spring suspension system
- With a transport width of only 2.5 m the machine can travel easily on narrow roads and does not require any special permissions
- An easy-to-use control panel manages all essential functions.
- The terminal provides optional features such as belt auto-stop when lifting the machine to ensure a clean swath ending
- The safety system allows basic machine functions and operation without electronics
- Large roller to operate in all crops
- The roller is in all positions hydraulic suspended
- Specially designed belt and pickup
- If the crops are dry, the roller can be lifted from the cabin to protect the leaves
- A single belt system with two pick-ups
- Fiberglass-reinforced saw blade-shaped crossbars provide optimal transportation for dry and wet crops
- An actively-driven belt, equipped with a sprocket and gear belt, ensures continuous operation even in heavy crop conditions
- Most maintenance and repairs can be done without removing the belt, and all parts can be disassembled with a single wrench
- The speed of the belt and pick-up can be precisely adjusted
- The tension of the belt is evenly distributed between the left and right sides since it is adjusted centrally
- Controlled pick-up with two cams and six tine bars
- For heavy crops such as silage and maize straw, it is recommended to use wide stripes
- Heavy-duty plastic strippers maintain shape when hitting rocks and their design prevents crop loss
- Even the shortest crop can be transported on the belt with the hydraulic adjustable roller suspended in all independent positions
- Replacing tines with only two bolts to remove (one per tine and one per plastic stripper) using only one hand
- It is possible to repair bearings, cam track, and tine bars without the need to disassemble the pick-up
- Electric height adjustment
- The machine is designed for both centre and side delivery
- The side delivery has a working width of 7m, expanding to a maximum of 7.3m
- With expanded pickups, the rake can create a central swath or side belts turning left or right
- As the crop is transported on the belt, there is no roping, so the swath can be picked up and transported several times
- Our mergers are designed and built to be maintenance-friendly
- All components can be easily disassembled
- Wear parts are in small size and replaceable with limited efforts
- To ensure a high speed and a clean crop in all conditions, four suspensions are used
- The pickup's standard tandem wheels protect the ground from damage
- The tandem wheel comes equipped with a spring suspension system
- With a transport width of only 2.5 m the machine can travel easily on narrow roads and does not require any special permissions
- An easy-to-use control panel manages all essential functions.
- The terminal provides optional features such as belt auto-stop when lifting the machine to ensure a clean swath ending
- The safety system allows basic machine functions and operation without electronics
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyre| Kverneland Roc 1073 S | ||
|---|---|---|
| Arbeidsbredde (m) | 7-7.3 | |
| Oppsamlingsbredde (m) | 2 x 2.95 | |
| Transportbredde (m) | 2.5 | |
| Belter n. | 2 | |
| Effektbehov (hk) | 70 | |
| Vekt (kg) | 3440 |
Tekniske spesifikasjoner
Tekniske spesifikasjoner
Last ned brosjyre
|
Arbeidsbredde senter skår (m) |
Pick-up bredde (m) |
Belter |
Transport bredde (m) |
HK Behov (hk) |
Vekt (kg) |
Kverneland Roc 1073 S |
7-7.3 |
2x2.95 |
2 |
2.5 |
70 |
3440 |